Used 23"x15"x18" Acra Drilling & Tapping CNC Machining Center with Mitsubishi Controller
Description
The A-series tapping machine has the highest cutting tool capacity and is built for extremely intricate processing, and has a highly rigid structural design. With high rapid traverse speed, fast tool changes, the spindle is maintained at a constant temperature and the 3 Axes (X, Y, Z), are configured to eliminate thermal displacement. Ergonomic operating design provides less distance between the operator and work piece to facilitate loading and unloading. Also included are the below features:
- Standard spindle speeds 8000 RPM
- Rigid Tapping 3000 RPM
- Spindle nose taper BT40(STD)
- 3 axes rapid traverse X, Y, Z: 48 / 48 / 48 m/min
- Fully enclosed heat isolated electric cabinet
- High Speed Arm-type ATC time T-T: 1.2 sec
- Directly coupled spindle drive system
Specification
- Table Size: 27” x 16”
- Max Table Load: 550 Lbs.
- T-Slot Width X Number: 0.55” x 3”
- X, Y, Z Axis Travel: 23.6” x 15.7” x 23.6”
- Spindle Center to Column: 19.2”
- Table to Spindle Nose: 5.9” ~ 29.5”
- Spindle Taper: BT40
- Pull Stud: 45 Degree MAS 403
- Spindle Speeds: 8,000 RPM
- Bearing Contact Angle: 25 Degree
- Bearing Type & Class: 7013 P4
- Spindle Driving System: Direct
- Spindle Diameter: 2.55”
- Spindle Motor (Mitsubishi): 10/7 HP
- X Drive Motor (Mitsubishi): 2 HP
- Y Drive Motor (Mitsubishi): 2 HP
- Z Drive Motor (Mitsubishi): 4 HP
- Coolant Pump: 620 in/min
- Flow Rate: 26.4 l/min
- Tank Capacity: 52 Gal.
- X, Y, Z Axis Rapid Traverse: 72/72/60 mm/min
- Tools Capacity: 24 +1
- Max. Tools Weight: 11 Lbs.
- Max. Tools Length: 9.8”
- ATC Time: 1.2 (T-T) Sec.
Controller Specifications
Max. Simultaneous Axes: 4
Standard Controlled Axes: 3
Program Storage Length: 500kb
Work piece coordinates: 54
Max. Variable Number: 700
Tool Offset pairs: 400
Conversational Programming: NAVI
Monitor: 8.4" TFT LCD
Interface: RS232
High Speed & High Accuracy Control Mode: G05P10000
Standard Control functions:
- Multi-language display
- ABS servo motor
- Tool length compensation
- Tool path compensation
- On-screen drafting
- High speed data server & Ethernet
- Memory card input/output
