×
×
Authorized GloryStar dealer for all of Southern California — the full catalog, not just what's on the floor. Two flagship demo units are running in our Pomona shop, so you can cut and bend your own material before you spend a dime.
Factory-backed GloryStar sales, parts, and service — not a gray-market reseller.
See it cut and bend in person at our Pomona, CA facility. By appointment.
Factory engineer install, on-site commissioning, and operator training included.
Full-machine warranty plus lifetime technical support and remote software updates.
Equipment financing options to keep your cash working. Ask for terms.
A real shop you can drive to, with people who answer the phone.
A 6kW fiber laser built to run all day. Fully enclosed with a dual exchange table, branded fiber source, and a rack-and-pinion dual drive. Cut mild steel, stainless, aluminum, brass, and copper — clean edge, fast, repeatable, shift after shift.
| Laser source power | 6 kW fiber |
|---|---|
| Working area | 120″ × 60″ (3048 × 1530 mm) |
| Z-axis travel | 16.9″ (430 mm) |
| Positioning accuracy | ≤0.03 mm/m |
| Repositioning accuracy | ≤±0.0008″ (±0.02 mm) |
| Max positioning speed | 623 ft/min (190 m/min) |
| Max acceleration | up to 4.0 G |
| Table exchange | ~15 sec |
| Control / cutting head | FSCUT bus CNC · BLT head |
| Drive | Rack & pinion dual drive |
| Power required | 480V / 3-phase / 60 Hz* |
| Warranty | 12 mo + lifetime tech support |
No hydraulics. No oil. No pump to rebuild. This is an all-electric servo brake — roughly 80% less power draw than a hydraulic machine, dead-on repeatability from a closed-loop servo drive, and a whole lot less to maintain. Quiet, clean, and fast.
| Nominal bending force | 39.5 US ton (350 kN) |
|---|---|
| Bending length (bed) | 47.5″ (1207 mm) |
| Distance between columns | 36.6″ (930 mm) |
| Max open height | 15.7″ (400 mm) |
| Slider stroke | 7.1″ (180 mm) |
| Throat depth | 12.6″ (320 mm) |
| Backgauge | 4-axis (X/R/Z1/Z2) AC servo |
| Bending speed | 2.0 in/s · fast 7.9 in/s (50 / 200 mm/s) |
| Position scales | Italian GIVI · 0.005 mm res. |
| Approx. weight | ~5,500 lb (2500 kg) |
| Power required | 480V / 3-phase / 60 Hz* |
| Warranty | 12 mo + lifetime tech support |
The GS-3015CE and GB-3512E on our floor are the flagship demo units — but we sell the whole GloryStar catalog. Tell us what you're making and we'll spec the right machine, source power, and configuration for your shop.
Fully enclosed and open-bed configurations. Work areas from 5′×10′ through 8′×40′. Source power 3 kW to 60 kW+.
Dedicated tube cutters and combo sheet/tube systems for round, square, channel, and angle stock.
The GB-E line scales from light fab through heavy production. No hydraulics, no oil, ~80% less energy than hydraulic brakes.
Single-wire and dual-wire-feed fiber welders. Faster than TIG, far less heat input, easier to learn.
Rust, paint, mill scale, and contamination removal — no media, no chemicals, no abrasive cleanup.
Integrated cut / load / unload / sort cells engineered for high-volume sheet metal operations.
Bring your own part and material. We'll run it on the GloryStar machines in our Pomona shop so you can see the edge and the bend before you buy.
Demos are by appointment. Our showroom's upgraded 600-amp service is being energized this summer — call ahead and we'll get you scheduled.