New 14"/20" x 40" Acra Precision Variable Speed Gap Bed Engine Lathe

Acra’s 14"/20" x 40" Precision Variable Speed Gap Bed Engine Lathe features the following:

1-1/2″ hole through spindle.
Heavy duty geared head; hardened and ground gears.
Hardened and ground bed-way.
Open type chip tray can be pulled out easily to remove chips.
5 HP (3.75 Kw) Three phase main motor.
Foot Brake provides rapid braking.
Emergency stop button equipped on the front of headstock.
Jog button for easy gear engagement and inching spindle.
Extra safety switch shuts down machine entirely for changing belt or gear for threading cutting.

Specifications

Capacity: 14″/20″ x 40″
Swing Over Bed: 14″
Swing Over Cross Slide: 8-5/8″
Swing In Gap: 20″
Distance Between Centers: 40″
Bed Width: 8-1/2″
Headstock:
- Spindle Nose: D1-4
- Spindle Bore: 1-1/2″
- Taper of Spindle: MT No. 5
- Spindle Speeds – Steps: Variable Speed 2 Step
- Spindle Speeds – Range: 30 ~ 2,500 RPM
Carriage:
- Cross Slide Travel: 6-1/2″
- Compound Slide Travel: 4″
Threads & Feeds:
- Inch Threads: 1~56 TPI
- Metric Threads: 0.45 ~ 7.5 mm
- Longitudinal Feeds: 0.0011 ~ 0.0543″/rev
- Cross Feeds: 0.0003 ~ 0.0181″/rev
Tailstock:
- Quill Diameter: 1-9/16″
- Quill Travel: 4-3/4″
- Quill Taper: MT No. 3
Power:
- Spindle Drive Motor: 5 HP
- Voltage: 230V or 460V AC ~ 3 PH