Product Overview
Introducing the GS-3015CS Single Table Fiber Laser from GloryStar, offered exclusively through Omni Machine Inc. — the entry point into GloryStar fiber laser cutting. A dedicated 5x10 machine for shops making the jump from plasma, outsourced cutting, or manual processes. No format options — just a straightforward 3015 laser with GloryStar build quality in a streamlined package.
High-strength cage-structure welded bed. Crossbeam with protective cover for laser safety. 120 m/min positioning, 1.2G acceleration. 21" LCD FSCUT CNC. Laser power 3kW to 12kW. Ships with transformer for U.S. 480V 3-phase 60Hz.
Product Features
The GS-3015CS is a precision CNC fiber laser cutting machine integrating a fully intelligent control system, laser technology, and precision machinery.
The main body adopts a high-strength cage-structure welded bed with high rigidity and stability, resistant to bending, earthquake, torsion, and deformation, ensuring machining accuracy under continuous cutting. Bending stiffness increased by more than 50%.
The crossbeam is a high-rigidity design with dual bus motors. The crossbeam is wrapped with a protective cover to prevent laser radiation from reaching operator eyes — resistant to smoke, dust, and laser radiation.
Bed and crossbeam undergo pentahedral gantry machining, vibration aging, and precision finishing. Independent electrical cabinet is convenient for maintenance, with reasonable layout not affected by machine thermal radiation.
Can be transported in a standard 20GP container.
Feature Highlights:
- High-precision cage-structure bed — 50%+ bending stiffness, stable processing of medium and heavy plates
- Dual bus motor + high-rigidity crossbeam with protective beam outer cover — laser radiation protection for operator safety
- Independent electrical cabinet — convenient maintenance, reasonable layout, not affected by machine thermal radiation
- Zoned dust extraction — 6–12 high-suction units, intelligent and environmentally friendly
- Fully automatic grease lubrication — 16 points (5 X, 6 Y, 5 Z), maintenance-free, 3x lifespan
- MCA electrical cabinet climate control (optional)
- Compact packaging — fits standard 20GP shipping container
Key Features:
- Dedicated 5x10 (3015) single-table format
- High-strength cage-structure bed
- Crossbeam with protective cover
- IPG or GloryStar laser — 3kW to 12kW
- FSCUT or GloryStar CNC with 21" LCD
- 120 m/min positioning | 1.2G acceleration
- Automatic grease lubrication
- Step-up transformer included
Technical Specifications:
Model: GS-3015CS
Type: CNC Fiber Laser, Single Table, Entry Level
Working Area: 120" x 60" (3048 x 1524mm)
Z-Axis Travel: 3.15" (80mm)
X/Y Positioning Accuracy: ≤0.03mm/m
X/Y Repeatability: ±0.02mm
Max Positioning Speed: 120 m/min (4,724 IPM)
Max Acceleration: 1.2G
Laser Source: IPG / GloryStar — 3kW, 6kW, or 12kW
CNC Control: FSCUT / GloryStar — 21" LCD
Table Load Capacity: 1.1 ton
Floor Space: 236" x 118" (6000 x 3000mm)
Machine Dimensions (L x W x H): 197" x 91" x 71" (5000 x 2300 x 1800mm)
Power Supply (U.S.): 480V, 3-Phase, 60Hz (Transformer Included)
Electrical Capacity: 27 kVA (3kW) | 42 kVA (6kW) | 100 kVA (12kW)
Protection Level: IP51
Product Configuration:
- Laser Source: 1 set — IPG / GloryStar
- Cutting Head: 1 set — BLT (BOCI) / GloryStar (with protective cover)
- Control System: 1 set — FSCUT (Bochu) / GloryStar
- Machine Bed: 1 set — GloryStar
- High-Precision Rack: 3 sets — AIK or equivalent
- Linear Guide Rails: 3 sets — DTX or equivalent
- Planetary Reducers: 3 sets — TECHMECH / DESBOER or equivalent
- Motors and Drives: 4 sets — GloryStar Custom
- Ball Screw: 1 set — HIWIN
- Flexible Cables and Drag Chains: 3 sets
- Proportional Valve: 1 set — GloryStar Custom / SMC (Japan) or equivalent
- Chiller: 1 set — GloryStar Standard Configuration
- Slag Hopper: 1 set — GloryStar
- Dust Extraction Fan: 1 set
Standard Equipment Included:
- IPG or GloryStar fiber laser source
- BLT (BOCI) or GloryStar cutting head (with protective cover)
- FSCUT or GloryStar CNC with 21" LCD
- AIK racks, DTX guides, TECHMECH/DESBOER reducers, HIWIN ball screw
- GloryStar chiller
- Dust extraction
- Slag hopper
- Automatic grease lubrication
- Step-up transformer
- Nesting software (base version)
- Standard nozzles, lenses, tools, and documentation
Available Options:
- Laser power (3kW / 6kW / 12kW)
- Enclosed housing upgrade
- Exchange table upgrade
- Rotary axis
- Extended warranty
- On-site installation and training
Operating Environment:
- Ambient Temperature: 50°F – 104°F (10°C – 40°C) — If ambient temperature exceeds 104°F, contact GloryStar for special configuration
- Ambient Humidity: Below 85% (no condensation allowed)
- Environmental Vibration: Acceleration below 4.9 m/s²
- Power Supply Voltage: AC 380V ±5% (Native) — U.S. installations use step-up transformer from 480V 3-Phase 60Hz
- Power Supply Frequency: 50/60Hz ±1Hz
- Power Interruption Time: Less than 8ms
Installation & Commissioning:
GloryStar provides a complete Equipment Installation Guide prior to delivery based on the buyer's site conditions, specifying equipment orientation, power cable layout, and foundation layout diagram.
Prior to the agreed delivery date, the buyer must complete foundation construction, electrical conduit layout, and all preparatory work per the Installation Guide, ensuring all site conditions meet equipment installation requirements.
Upon arrival, the buyer and GloryStar's service engineer jointly inspect the equipment for appearance damage, impact, dents, or water exposure. Any transportation abnormalities must be documented with photos or video and reported immediately to GloryStar.
If no abnormalities are found, the buyer carries out unloading, hoisting, unpacking, and positioning per the Installation Guide. GloryStar's service engineer provides on-site guidance. All lifting and positioning must comply with standard safety procedures — improper or reckless operations are strictly prohibited.
After positioning, GloryStar's service engineer performs installation and commissioning per standardized procedures. The process is photographed and archived in GloryStar's customer service records.
Note: The buyer must assign personnel to be present during the entire installation and commissioning process to ensure proper understanding and familiarity with the equipment.
Warranty Period & Scope:
Warranty Period: 12 months from the date the equipment is installed, commissioned, and accepted.
During the warranty period, GloryStar will provide timely maintenance service and spare parts necessary for maintenance free of charge. Excludes protective lenses, nozzles, filters, and other wear/consumable spare parts.
Not Covered Under Warranty:
- Failures or damages caused by improper operation or violation of operating procedures
- Unauthorized modifications or disassembly by the buyer
- Use of substandard gas (including incorrect pressure or purity)
- Force majeure events (earthquakes, floods, etc.)
After-Sales Service Commitment:
- Remote support response within 2 hours (phone or remote assistance)
- On-site service response within 24 hours (regions with GloryStar service centers)
- On-site service response within 48 hours (regions without service centers)
- Lifetime free technical support and remote software upgrades
All warranty service coordinated through Omni Machine Inc. with direct support from GloryStar.
Documentation and Accessories Included:
Technical Documents:
- Operating instructions (1 copy)
- Electrical wiring diagrams and schematic diagrams (1 copy)
- Specialized laser-cutting nesting software (1 set — system version dependent)
- Product certificate of conformity (1 copy)
- Packing list (1 copy)
Tools:
- Standard tool set (allen wrench, etc.) — 1 set
- Lens cleaning paper, box, dust-free — 1 set
- Anhydrous ethanol, bottled, 95% purity — 1 bottle
Accessories:
- Nozzles, common specifications — 10
- Protective lenses (laser head dependent) — 5
- Ceramic ring (laser head dependent) — 1
339 Quality Inspection Standards:
Every GloryStar machine undergoes 339 quality inspection checkpoints using precision measurement equipment including:
- Ensemble-level testing of running rail flatness accuracy — Micrometer
- Rack and pinion parallelism to guideway testing — Micrometer
- Small mechanical parts accuracy testing — Japan-made Keyence ultra-fine microscope
- Machining accuracy verification to machine standard — Caliper
- Supervision and inspection of small mechanical parts — Gradienter
- Running guide rail straightness verification — Optical collimator
- Axis accuracy correction — UK Renishaw laser interferometer
- Leveling verification — Precision level
Why the GS-3015CS?
- Lowest cost of entry into GloryStar fiber laser cutting
- Dedicated 5x10 — no options paralysis, just a laser ready to cut
- Ideal for adding a first laser alongside plasma or waterjet
- Upgradeable — add enclosure, exchange table, or rotary as you grow
