Product Overview
Introducing the GS-L Series Extra Large Format Fiber Laser from GloryStar, offered exclusively through Omni Machine Inc. — the biggest cutting platform in the GloryStar lineup, with formats from 13030 to 25035 and unlimited splicing length. Laser power from 12kW to 60kW. Dual table capacities up to 55 tons. Optional bevel cutting.
Standardized modular bed with infinite width extension. 300mm x 400mm welded steel crossbeam (not aluminum) processed after high-temperature annealing for maximum strength. Ships with transformer for U.S. 480V.
Product Features
The GS-L series is a precision CNC fiber laser cutting machine integrating full intelligent control, laser technology, and precision mechanics.
The main body uses a hollow bed with gantry-style double drive. The bed adopts a standardized and modular structure — bed length = N x standard module + splicing module, with unlimited customization of width and length. This effectively avoids deformation and accuracy loss from cutting heat and heavy loads. Drive and plate-bearing systems designed separately, greatly reducing thermal impact on bed accuracy.
The crossbeam adopts a low center-of-gravity design with a 300mm x 400mm large cross-sectional welded steel crossbeam (not aluminum), processed after high-temperature annealing. Compared with aluminum crossbeams, it has higher strength, rigidity, and bending/torsional resistance. Each joint has three mortise-and-tenon connections for accuracy retention, efficient installation, and high reliability.
Key components undergo annealing, 5-axis machining, vibration aging, and precision finishing. Modular workbench with single-module replacement. Optional bevel cutting with AB swing axis (±45°, V/Y/X groove types, one-time forming).
Feature Highlights:
- Hollow bed with modular structure — unlimited width/length customization, load-bearing separated from drive
- 300mm x 400mm welded steel crossbeam (not aluminum) — higher strength, rigidity, and bending/torsional resistance than aluminum
- Three mortise-and-tenon joints per connection — improved accuracy retention and installation convenience
- Modular workbench — replace only damaged table modules
- Large distance between crossbeam and workbench — adapts to cutting various plate thicknesses
- Optional bevel cutting — AB swing axis, ±45° max, V/Y/X groove types, one-time forming
- Beam light curtain anti-collision
- Fully automatic grease lubrication — 16 points (5 X, 6 Y, 5 Z), 3x lifespan
- MCA electrical cabinet climate control (optional)
Key Features:
- Extra large — up to 25035 (82' x 11.5')
- Unlimited splicing length
- Modular bed with infinite extension
- 300mm x 400mm welded steel crossbeam
- 12kW to 60kW laser
- Optional bevel cutting
- Dual table up to 55 tons
- 75 m/min | 0.5G
- Step-up transformer included
Technical Specifications:
Type: Extra Large Format CNC Fiber Laser with Exchange Table
Z-Axis Travel: 10.6" (270mm) — 16.9" (430mm) with bevel
X/Y Positioning Accuracy: ≤0.03mm/m
X/Y Repeatability: ±0.02mm
Max Positioning Speed: 75 m/min (2,953 IPM)
Max Acceleration: 0.5G
Laser Source: IPG / GloryStar — 12kW to 60kW
Power Supply (U.S.): 480V, 3-Phase, 60Hz (Transformer Included)
Protection Level: IP51
Specifications by Format Size:
| Specification | 13030 | 16035 | 25035 |
| Working Area | 512" x 118" (13000x3000mm) |
630" x 138" (16000x3500mm) |
984" x 138" (25000x3500mm) |
| Bevel Cutting Area | 492"x98" | 610"x118" | 965"x118" |
| Dual Table Capacity | 20 ton | 35 ton | 55 ton |
| Floor Size | 728"x323" | 886"x343" | 1299"x343" |
| Machine Dims | 661"x202"x94" | 807"x221"x94" | 1213"x221"x94" |
Product Configuration:
- Laser Source: 1 set — IPG / GloryStar
- Cutting Head: 1 set — BLT (BOCI) / GloryStar
- Control System: 1 set — FSCUT (Bochu) / GloryStar
- Machine Bed: 1 set — GloryStar (modular)
- Racks: 3 sets — AIK or equivalent
- Guides: 3 sets — DTX (Taiwan) or equivalent
- Reducers: 3 sets — TECHMECH / DESBOER or equivalent
- Motors: 4 sets — GloryStar Custom
- Ball Screw: 1 set — HIWIN
- Chiller: 1 set — S&A / Hanli
- Slag Hopper: 1 set
- Dust Extraction: 1 set
Standard Equipment Included:
- IPG or GloryStar fiber laser source
- BLT or GloryStar cutting head
- FSCUT or GloryStar CNC with 27" LCD
- Dual exchange table
- Modular bed
- AIK racks, DTX guides, TECHMECH/DESBOER reducers, HIWIN ball screw
- S&A / Hanli chiller
- Dust extraction
- Slag hopper
- Automatic grease lubrication
- Step-up transformer
- Nesting software
- Standard tooling and documentation
Available Options:
- Laser power (12–60kW)
- Bevel cutting head
- Automatic loading
- Extended formats beyond 25035
- Extended warranty
- On-site installation and training
Operating Environment:
- Ambient Temperature: 50°F – 104°F (10°C – 40°C) — If ambient temperature exceeds 104°F, contact GloryStar for special configuration
- Ambient Humidity: Below 85% (no condensation allowed)
- Environmental Vibration: Acceleration below 4.9 m/s²
- Power Supply Voltage: AC 380V ±5% (Native) — U.S. installations use step-up transformer from 480V 3-Phase 60Hz
- Power Supply Frequency: 50/60Hz ±1Hz
- Power Interruption Time: Less than 8ms
Installation & Commissioning:
GloryStar provides a complete Equipment Installation Guide prior to delivery based on the buyer's site conditions, specifying equipment orientation, power cable layout, and foundation layout diagram.
Prior to the agreed delivery date, the buyer must complete foundation construction, electrical conduit layout, and all preparatory work per the Installation Guide, ensuring all site conditions meet equipment installation requirements.
Upon arrival, the buyer and GloryStar's service engineer jointly inspect the equipment for appearance damage, impact, dents, or water exposure. Any transportation abnormalities must be documented with photos or video and reported immediately to GloryStar.
If no abnormalities are found, the buyer carries out unloading, hoisting, unpacking, and positioning per the Installation Guide. GloryStar's service engineer provides on-site guidance. All lifting and positioning must comply with standard safety procedures — improper or reckless operations are strictly prohibited.
After positioning, GloryStar's service engineer performs installation and commissioning per standardized procedures. The process is photographed and archived in GloryStar's customer service records.
Note: The buyer must assign personnel to be present during the entire installation and commissioning process to ensure proper understanding and familiarity with the equipment.
Warranty Period & Scope:
Warranty Period: 12 months from the date the equipment is installed, commissioned, and accepted.
During the warranty period, GloryStar will provide timely maintenance service and spare parts necessary for maintenance free of charge. Excludes protective lenses, nozzles, filters, and other wear/consumable spare parts.
Not Covered Under Warranty:
- Failures or damages caused by improper operation or violation of operating procedures
- Unauthorized modifications or disassembly by the buyer
- Use of substandard gas (including incorrect pressure or purity)
- Force majeure events (earthquakes, floods, etc.)
After-Sales Service Commitment:
- Remote support response within 2 hours (phone or remote assistance)
- On-site service response within 24 hours (regions with GloryStar service centers)
- On-site service response within 48 hours (regions without service centers)
- Lifetime free technical support and remote software upgrades
All warranty service coordinated through Omni Machine Inc. with direct support from GloryStar.
Documentation and Accessories Included:
Technical Documents:
- Operating instructions (1 copy)
- Electrical wiring diagrams and schematic diagrams (1 copy)
- Specialized laser-cutting nesting software (1 set — system version dependent)
- Product certificate of conformity (1 copy)
- Packing list (1 copy)
Tools:
- Standard tool set (allen wrench, etc.) — 1 set
- Lens cleaning paper, box, dust-free — 1 set
- Anhydrous ethanol, bottled, 95% purity — 1 bottle
Accessories:
- Nozzles, common specifications — 10
- Protective lenses (laser head dependent) — 5
- Ceramic ring (laser head dependent) — 1
339 Quality Inspection Standards:
Every GloryStar machine undergoes 339 quality inspection checkpoints using precision measurement equipment including:
- Ensemble-level testing of running rail flatness accuracy — Micrometer
- Rack and pinion parallelism to guideway testing — Micrometer
- Small mechanical parts accuracy testing — Japan-made Keyence ultra-fine microscope
- Machining accuracy verification to machine standard — Caliper
- Supervision and inspection of small mechanical parts — Gradienter
- Running guide rail straightness verification — Optical collimator
- Axis accuracy correction — UK Renishaw laser interferometer
- Leveling verification — Precision level
Why the GS-L?
- 82-foot cutting length on 25035
- 55-ton table on 25035
- Modular bed extends to any width
- Steel crossbeam provides rigidity for ultra-high-power at scale
- Bevel cutting eliminates separate weld-prep stations
