Product Overview
Introducing the NS-CE Series Ultra-High Power Fiber Laser Cutting Machine from GloryStar, offered exclusively through Omni Machine Inc. — the top of GloryStar's product line, purpose-built for ultra-high-power cutting of thick plate and large-format material. Starting at 12kW and scaling to 40kW, the NS-CE is a production machine for structural steel, shipbuilding, heavy equipment, and large-scale fabrication operations that process plate up to 4 inches thick.
The NS-CE features GloryStar's patented dual-bed frame design (Patent No. ZL201821103166.6). The inner bed supports workbench weight and absorbs thermal deformation from ultra-high-power laser heating, while the outer bed carries the drive system independently. This increases bending stiffness by more than 50% and completely isolates thermal effects from positioning accuracy. The 160mm table-to-cutter height with 150mm support square tubes accommodates full-surface processing of plate up to 100mm (4") thick. Full servo control on the exchange table delivers millimeter-level positioning accuracy.
Available in three large-format sizes — 6025, 8025, and 12025. IP54 protection level. Ships with step-up transformer for standard U.S. 480V 3-phase 60Hz.
Product Features
The NS-CE series is a precision CNC fiber laser cutting machine integrating full intelligent control, laser technology, and precision mechanics, purpose-built for ultra-high-power cutting applications.
The main body features GloryStar's patented dual-bed frame design (Patent No. ZL201821103166.6). The inner bed supports workbench weight and absorbs thermal deformation from ultra-high-power laser heating. The outer bed carries the drive system independently. This dual-frame architecture completely isolates thermal effects from positioning accuracy and increases bending stiffness by more than 50%.
The crossbeam uses a low center-of-gravity structure with aerospace-grade 250mm x 250mm aluminum alloy profiles. The table-to-cutter height is 160mm with 150mm-tall support square tubes, accommodating full-surface processing of plate up to 100mm (4") thick.
Full servo control on the exchange table (Patent No. ZL202022283769.2) improves positioning accuracy to millimeter-level and reduces failure rates. All components undergo the full heat treatment, 5-axis machining, vibration aging, and precision finishing process.
Feature Highlights:
- Patented dual-bed frame (ZL201821103166.6) — inner bed absorbs thermal deformation, outer bed carries drive independently, 50%+ bending stiffness increase
- Full servo exchange table (ZL202022283769.2) — millimeter-level positioning accuracy, reduced failure rate
- 160mm table-to-cutter height with 150mm support square tubes — handles full-surface processing of plate up to 4" (100mm) thick
- Low center of gravity crossbeam — 250mm x 250mm aerospace aluminum
- Zoned dust extraction
- Beam light curtain anti-collision with door opening and motor torque protection
- Multi-scenario hopper — left/right exit flexibility
- Fully automatic grease lubrication — 16 points (5 X, 6 Y, 5 Z), maintenance-free, 3x lifespan
- MCA electrical cabinet climate control (optional)
Key Features:
- Patented dual-bed frame — thermal and load isolation for ultra-high-power cutting
- Full servo exchange table with millimeter-level positioning accuracy
- 160mm table-to-cutter height — supports plate up to 4" (100mm) thick
- IPG or GloryStar fiber laser — 12kW to 40kW
- IP54 protection level (higher than standard GS series)
- Fully enclosed safety housing
- Aerospace-grade aluminum crossbeam (250mm x 250mm)
- Maximum positioning speed: 170 m/min (6,693 IPM)
- Z-axis travel: 18.1" (460mm)
- Fully automatic grease lubrication (16 points)
- Zoned dust extraction
- Step-up transformer included
Technical Specifications:
Type: Ultra-High Power CNC Fiber Laser, Fully Enclosed with Exchange Table
Z-Axis Travel: 18.1" (460mm)
X/Y Positioning Accuracy: ≤0.03mm/m
X/Y Repeatability: ±0.02mm
Max Positioning Speed: 170 m/min (6,693 IPM)
Laser Source: IPG / GloryStar — 12kW, 20kW, 30kW, or 40kW
Cutting Head: BLT (BOCI) / GloryStar
CNC Control: FSCUT (Bochu) / GloryStar — 27" LCD
Power Supply (U.S.): 480V, 3-Phase, 60Hz (Transformer Included)
Electrical Capacity: 100 kVA (12kW) | 150 kVA (20kW) | 300 kVA (30kW) | 400 kVA (40kW)
Protection Level: IP54
Specifications by Format Size:
| Specification | 6025 | 8025 | 12025 |
| Working Area | 236" x 98" (6000 x 2500mm) |
315" x 98" (8000 x 2500mm) |
472" x 98" (12000 x 2500mm) |
| X-Axis Travel | 100" (2530mm) | 100" (2530mm) | 100" (2530mm) |
| Y-Axis Travel | 238" (6050mm) | 317" (8050mm) | 474" (12050mm) |
| Max Acceleration | 3.0G | 2.8G | 2.8G |
| Floor Size | 630" x 236" (16000 x 6000mm) |
866" x 236" (22000 x 6000mm) |
1181" x 236" (30000 x 6000mm) |
| Machine Dimensions | 602" x 165" x 98" (15300 x 4200 x 2500mm) |
839" x 173" x 98" (21300 x 4400 x 2500mm) |
1110" x 173" x 98" (28200 x 4400 x 2500mm) |
Product Configuration:
- Laser Source: 1 set — IPG / GloryStar
- Cutting Head: 1 set — BLT (BOCI) / GloryStar
- Control System: 1 set — FSCUT (Bochu) / GloryStar
- Machine Bed: 1 set — GloryStar (patented dual-bed frame)
- High-Precision Rack for X/Y Axis: 3 sets — GUDEL (Switzerland) / SVAROG (Czech) or equivalent
- Linear Guide Rails: 3 sets — DTX or equivalent
- Planetary Reducers: 3 sets — TECHMECH (Germany) / DESBOER (Japan) or equivalent
- High-Speed Motors and Drives: 4 sets — GloryStar Custom
- Precision Ball Screw: 1 set — HIWIN
- Flexible Cables and Drag Chains: 3 sets
- Proportional Valve: 1 set — FELTON (USA) / SMC (Japan) or equivalent
- Chiller: 1 set — S&A / Hanli
- Slag Hopper: 1 set — GloryStar
- Dust Extraction Fan: 1 set
Standard Equipment Included:
- IPG or GloryStar fiber laser source (power per order)
- BLT (BOCI) or GloryStar cutting head
- FSCUT (Bochu) or GloryStar CNC control with 27" LCD
- Dual exchange table with full servo positioning
- Fully enclosed housing
- GUDEL / SVAROG high-precision racks
- DTX linear guide rails (3 sets)
- TECHMECH / DESBOER planetary reducers (3 sets)
- GloryStar motors and drives (4 sets)
- HIWIN ball screw
- FELTON (USA) / SMC (Japan) proportional valve
- S&A / Hanli chiller
- Zoned dust extraction with fan
- Slag hopper
- Automatic grease lubrication (16 points)
- Step-up transformer
- Nesting software (base version)
- Standard nozzles (10), protective lenses (5), ceramic rings (2)
- Operating instructions, wiring diagrams, certificate of conformity
Available Options:
- Laser power configs (12kW / 20kW / 30kW / 40kW)
- Automatic loading/unloading
- Bevel cutting head
- Additional software
- MCA climate control
- Extended warranty
- On-site installation and training
Operating Environment:
- Ambient Temperature: 50°F – 104°F (10°C – 40°C) — If ambient temperature exceeds 104°F, contact GloryStar for special configuration
- Ambient Humidity: Below 85% (no condensation allowed)
- Environmental Vibration: Acceleration below 4.9 m/s²
- Power Supply Voltage: AC 380V ±5% (Native) — U.S. installations use step-up transformer from 480V 3-Phase 60Hz
- Power Supply Frequency: 50/60Hz ±1Hz
- Power Interruption Time: Less than 8ms
Installation & Commissioning:
GloryStar provides a complete Equipment Installation Guide prior to delivery based on the buyer's site conditions, specifying equipment orientation, power cable layout, and foundation layout diagram.
Prior to the agreed delivery date, the buyer must complete foundation construction, electrical conduit layout, and all preparatory work per the Installation Guide, ensuring all site conditions meet equipment installation requirements.
Upon arrival, the buyer and GloryStar's service engineer jointly inspect the equipment for appearance damage, impact, dents, or water exposure. Any transportation abnormalities must be documented with photos or video and reported immediately to GloryStar.
If no abnormalities are found, the buyer carries out unloading, hoisting, unpacking, and positioning per the Installation Guide. GloryStar's service engineer provides on-site guidance. All lifting and positioning must comply with standard safety procedures — improper or reckless operations are strictly prohibited.
After positioning, GloryStar's service engineer performs installation and commissioning per standardized procedures. The process is photographed and archived in GloryStar's customer service records.
Note: The buyer must assign personnel to be present during the entire installation and commissioning process to ensure proper understanding and familiarity with the equipment.
Warranty Period & Scope:
Warranty Period: 12 months from the date the equipment is installed, commissioned, and accepted.
During the warranty period, GloryStar will provide timely maintenance service and spare parts necessary for maintenance free of charge. Excludes protective lenses, nozzles, filters, and other wear/consumable spare parts.
Not Covered Under Warranty:
- Failures or damages caused by improper operation or violation of operating procedures
- Unauthorized modifications or disassembly by the buyer
- Use of substandard gas (including incorrect pressure or purity)
- Force majeure events (earthquakes, floods, etc.)
After-Sales Service Commitment:
- Remote support response within 2 hours (phone or remote assistance)
- On-site service response within 24 hours (regions with GloryStar service centers)
- On-site service response within 48 hours (regions without service centers)
- Lifetime free technical support and remote software upgrades
All warranty service coordinated through Omni Machine Inc. with direct support from GloryStar.
Documentation and Accessories Included:
Technical Documents:
- Operating instructions (1 copy)
- Electrical wiring diagrams and schematic diagrams (1 copy)
- Specialized laser-cutting nesting software (1 set — system version dependent)
- Product certificate of conformity (1 copy)
- Packing list (1 copy)
Tools:
- Standard tool set (allen wrench, etc.) — 1 set
- Lens cleaning paper, box, dust-free — 1 set
- Anhydrous ethanol, bottled, 95% purity — 1 bottle
Accessories:
- Nozzles, common specifications — 10
- Protective lenses (laser head dependent) — 5
- Ceramic ring (laser head dependent) — 2
339 Quality Inspection Standards:
Every GloryStar machine undergoes 339 quality inspection checkpoints using precision measurement equipment including:
- Ensemble-level testing of running rail flatness accuracy — Micrometer
- Rack and pinion parallelism to guideway testing — Micrometer
- Small mechanical parts accuracy testing — Japan-made Keyence ultra-fine microscope
- Machining accuracy verification to machine standard — Caliper
- Supervision and inspection of small mechanical parts — Gradienter
- Running guide rail straightness verification — Optical collimator
- Axis accuracy correction — UK Renishaw laser interferometer
- Leveling verification — Precision level
Why the NS-CE for Ultra-High-Power Work?
- Patented dual-bed frame isolates thermal deformation from positioning accuracy — critical above 20kW
- 160mm table-to-cutter height handles plate up to 4 inches thick with full-surface access
- IP54 protection — better sealed against dust and moisture in heavy fabrication environments
- Full servo exchange table eliminates mechanical positioning drift
- Purpose-built for sustained high-power operation — not a light-duty machine with an oversized laser bolted on
