Product Overview
Introducing the GS-CS MAX Series from GloryStar, offered exclusively through Omni Machine Inc. — a heavy-duty single-table machine for big cutting areas with 12kW to 40kW laser power. Available in 6225 and 13030 formats with optional bevel cutting. Table capacity up to 25 tons.
Split inner/outer bed structure. Large-section mortise-tenon welded crossbeam with dual linear motors. Ships with transformer for U.S. 480V 3-phase 60Hz.
Product Features
The GS-CS MAX series is a precision CNC fiber laser cutting machine integrating full intelligent control, laser technology, and precision mechanics.
The main body adopts a split-type inner/outer bed structure delivering enhanced rigidity and thermal deformation resistance. The crossbeam uses a large-section, high-rigidity mortise-tenon welded construction with dual linear motors for exceptional rigidity, distortion resistance, and dynamic performance.
All key components undergo annealing, 5-axis machining, vibration aging, and precision finishing. Modular workbench with single-module swap capability. Optional bevel cutting with AB oscillating axes (±45°).
Feature Highlights:
- Split inner/outer bed — enhanced rigidity and thermal isolation
- Dual linear motor crossbeam
- Modular worktable — replace damaged modules individually
- Optional bevel cutting — ±45° max angle
- Anti-collision protection, multi-scenario hopper, auto grease lubrication (16 points), MCA climate control (optional)
Key Features:
- Large-format: 6225 and 13030
- Split inner/outer bed
- Dual linear motor crossbeam
- 12kW to 40kW laser
- Optional bevel cutting
- Table capacity up to 25 tons
- 110 m/min | 0.75G acceleration
- 27" LCD
- Step-up transformer included
Technical Specifications:
Type: Large-Format CNC Fiber Laser, Single Table
Z-Axis Travel: 4.5" (115mm)
X/Y Positioning Accuracy: ≤0.05mm/m
X/Y Repeatability: ±0.03mm
Max Positioning Speed: 110 m/min (4,331 IPM)
Max Acceleration: 0.75G
Laser Source: IPG / GloryStar — 12kW, 20kW, 30kW, or 40kW
Power Supply (U.S.): 480V, 3-Phase, 60Hz (Transformer Included)
Electrical Capacity: 100 kVA (12kW) | 150 kVA (20kW) | 200 kVA (30kW) | 300 kVA (40kW)
Protection Level: IP51
Specifications by Format Size:
| Specification | 6225 | 13030 |
| Working Area | 248" x 100" (6300 x 2540mm) |
520" x 120" (13208 x 3048mm) |
| Table Load | 10 ton | 25 ton |
| Floor Size | 413"x217" | 669"x236" |
| Machine Dims | 374"x144"x75" | 610"x167"x75" |
Product Configuration:
- Laser Source: 1 set — IPG / GloryStar
- Cutting Head: 1 set — BLT (BOCI) / GloryStar
- Control System: 1 set — FSCUT (Bochu) / GloryStar
- Machine Bed: 1 set — GloryStar (split inner/outer)
- Racks: 3 sets — AIK or equivalent
- Guides: 3 sets — DTX or equivalent
- Reducers: 3 sets — TECHMECH / DESBOER or equivalent
- Motors: 4 sets — GloryStar Custom
- Ball Screw: 1 set — HIWIN
- Chiller: 1 set — GloryStar
- Discharge Hopper: 1 set
- Dust Extraction: 1 set
Standard Equipment Included:
- IPG or GloryStar fiber laser source
- BLT or GloryStar cutting head
- FSCUT or GloryStar CNC with 27" LCD
- AIK racks, DTX guides, TECHMECH/DESBOER reducers, HIWIN ball screw
- GloryStar chiller
- Dust extraction
- Discharge hopper
- Automatic grease lubrication
- Step-up transformer
- Nesting software
- Standard tooling and documentation
Available Options:
- Laser power (12–40kW)
- Bevel cutting head
- Automatic loading
- Extended software
- Extended warranty
- On-site installation and training
Operating Environment:
- Ambient Temperature: 50°F – 104°F (10°C – 40°C) — If ambient temperature exceeds 104°F, contact GloryStar for special configuration
- Ambient Humidity: Below 85% (no condensation allowed)
- Environmental Vibration: Acceleration below 4.9 m/s²
- Power Supply Voltage: AC 380V ±5% (Native) — U.S. installations use step-up transformer from 480V 3-Phase 60Hz
- Power Supply Frequency: 50/60Hz ±1Hz
- Power Interruption Time: Less than 8ms
Installation & Commissioning:
GloryStar provides a complete Equipment Installation Guide prior to delivery based on the buyer's site conditions, specifying equipment orientation, power cable layout, and foundation layout diagram.
Prior to the agreed delivery date, the buyer must complete foundation construction, electrical conduit layout, and all preparatory work per the Installation Guide, ensuring all site conditions meet equipment installation requirements.
Upon arrival, the buyer and GloryStar's service engineer jointly inspect the equipment for appearance damage, impact, dents, or water exposure. Any transportation abnormalities must be documented with photos or video and reported immediately to GloryStar.
If no abnormalities are found, the buyer carries out unloading, hoisting, unpacking, and positioning per the Installation Guide. GloryStar's service engineer provides on-site guidance. All lifting and positioning must comply with standard safety procedures — improper or reckless operations are strictly prohibited.
After positioning, GloryStar's service engineer performs installation and commissioning per standardized procedures. The process is photographed and archived in GloryStar's customer service records.
Note: The buyer must assign personnel to be present during the entire installation and commissioning process to ensure proper understanding and familiarity with the equipment.
Warranty Period & Scope:
Warranty Period: 12 months from the date the equipment is installed, commissioned, and accepted.
During the warranty period, GloryStar will provide timely maintenance service and spare parts necessary for maintenance free of charge. Excludes protective lenses, nozzles, filters, and other wear/consumable spare parts.
Not Covered Under Warranty:
- Failures or damages caused by improper operation or violation of operating procedures
- Unauthorized modifications or disassembly by the buyer
- Use of substandard gas (including incorrect pressure or purity)
- Force majeure events (earthquakes, floods, etc.)
After-Sales Service Commitment:
- Remote support response within 2 hours (phone or remote assistance)
- On-site service response within 24 hours (regions with GloryStar service centers)
- On-site service response within 48 hours (regions without service centers)
- Lifetime free technical support and remote software upgrades
All warranty service coordinated through Omni Machine Inc. with direct support from GloryStar.
Documentation and Accessories Included:
Technical Documents:
- Operating instructions (1 copy)
- Electrical wiring diagrams and schematic diagrams (1 copy)
- Specialized laser-cutting nesting software (1 set — system version dependent)
- Product certificate of conformity (1 copy)
- Packing list (1 copy)
Tools:
- Standard tool set (allen wrench, etc.) — 1 set
- Lens cleaning paper, box, dust-free — 1 set
- Anhydrous ethanol, bottled, 95% purity — 1 bottle
Accessories:
- Nozzles, common specifications — 10
- Protective lenses (laser head dependent) — 5
- Ceramic ring (laser head dependent) — 1
339 Quality Inspection Standards:
Every GloryStar machine undergoes 339 quality inspection checkpoints using precision measurement equipment including:
- Ensemble-level testing of running rail flatness accuracy — Micrometer
- Rack and pinion parallelism to guideway testing — Micrometer
- Small mechanical parts accuracy testing — Japan-made Keyence ultra-fine microscope
- Machining accuracy verification to machine standard — Caliper
- Supervision and inspection of small mechanical parts — Gradienter
- Running guide rail straightness verification — Optical collimator
- Axis accuracy correction — UK Renishaw laser interferometer
- Leveling verification — Precision level
Why the GS-CS MAX?
- 13030 gives 43 feet of cutting on a single table
- 25-ton table handles heaviest plate
- Split bed maintains accuracy under sustained loads
- Optional bevel cutting eliminates secondary weld-prep
